Permanent magnet magnetic separator

Graphite anode material simple PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal device, can effectively remove the iron element contained in the cathode material and the iron powder brought in by artificial operation. Including discharge pipe and outlet, the discharge pipe from top to down stainless steel spiral pipe, and the inner wall of the section is evenly set with several U-type electromagnets, discharge pipe is also equipped with several magnetic rods in the middle of the inner wall of the discharge pipe,

PTMS Electromagnetic Separator

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC The magnetic rod is set at 5-20cm at the front end of each U-type electromagnet; the discharge port is provided with a magnetic wire mesh. Each magnetic rod is equipped with a pipe vibrator, and the pipe vibrator is a high-frequency vibrator. The shape and size of the U-type electromagnet conforms to the inner wall of the discharge pipe, and the bending end of the U-type electromagnet is attached to the lower side of the discharge pipe.

what is magnetic separation？

The U-type electromagnet is a powerful magnet with a magnetic field above 12,000. The advantages are: PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC device mainly removes the iron contained in the negative material and the iron powder brought by artificial operation. The project uses a strong magnet with more than 12000 magnetic field to load into the product outlet of the production equipment, so that the material can enter the next process through the magnet.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com