Check the surface condition of the PTMS magnetic separation drum, wipe the drum surface with a clean cloth, to see whether there is wear, scratch or adhesive phenomenon. If there is a slight adhesive on the surface of the drum, use with special detergent, but be careful not to damage the surface of the drum. For rollers with severe wear and scratches, consider replacing the drum or repairing its surface.
Check the rotation of the PTMS magnetic separation drum under the condition of ensuring safety, manually rotate the drum, and feel whether the rotation of the drum is smooth and whether there is a lag phenomenon. At the same time, the tachometer can be used to measure the speed of the drum and compare the measurement results with the speed value specified by the equipment. If the drum speed is abnormal, check it. Too much fine grain size will cause a decrease in the handling capacity of the equipment, and the possibility of mixing mechanical iron in the crushing process increases, because the number of crushing times increases.
Therefore, it is necessary to determine the appropriate grinding particle size according to the actual situation, such as 80-200 items may be a more appropriate range. In addition, parameters such as grinding time and mill speed also need to be optimized to achieve the best grinding effect and thus the improvement of PTMS magnetic separation iron removal efficiency.
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com
