drum magnetic separator

A PTMS MAGNETIC SEPARATOR high-efficiency iron removal process of kaolin, which includes the following steps: simple purification of kaolin raw ore to obtain magnetic raw material; magnetic raw material to add water to prepare a mixed slurry with solid content of 15%, and then add sodium hexadmetaphosphite with 6% mass of magnetic raw material after stirring for 20min, over 325 mesh wet sieve;

PTMS Electromagnetic Separator

Conduct high gradient magnetic separation of the slurry under 325 mesh screen, control the magnetic field strength of the high gradient PTMS MAGNETIC SEPARATOR to 1.8T, and the slurry flow rate is 1.0 cm/s. After the slurry through high gradient magnetic separation machine, the amount of alum is 3% of the quality of concentrate slurry, then filtering, drying, packing, magnetic concentrate;

what is magnetic separation used for?

The resulting magnetic concentrate concentrate was calcined to get calcined kaolin (or calcined products) and calcined kaolin for whiteness test. The firing whiteness of PTMS MAGNETIC SEPARATOR iron concentrate was tested, the firing whiteness was 92.7%, the Fe2O3 content was reduced from 1.27% before magnetic separation to 0.40%, the iron removal rate was 68.5%, and the TiO2 content was reduced from 0.29% to 0.103%.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com