The brush roller acts like a cleaner rotating on the surface of the magnetic roller, brushing off the concentrate that adheres to the surface. The hardness and arrangement of the brush bristles can significantly impact the efficiency of the concentrate discharge process. If the bristles are too soft, they may not effectively remove the concentrate; if they are too hard, they might damage the magnetic roller's surface. Therefore, when designing the brush roller for a PTMS magnetic separation, it is essential to select appropriate bristle parameters based on the material of the magnetic roller and the characteristics of the concentrate
Special design and structure of different types of magnetic separators The tank structure design of wet permanent magnet tubular PTMS magnetic separation The wet permanent magnet tubular magnetic separator is divided into three different tank structures according to the tank structure: co-current, counter-current and semi-counter-current. Different tank structures are suitable for different beneficiation requirements and material characteristics to meet different mineral processing processes
In the flow-through tank structure, the direction of pulp flow is the same as the rotation direction of the cylinder. This structure is suitable for processing coarse and magnetic materials. In the flow-through tank of PTMS magnetic separation, the pulp can quickly pass through the magnetic field area, and magnetic ore particles can be rapidly adsorbed onto the surface of the cylinder, thus achieving a relatively high processing capacity
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com
