water separator manufacturers

According to their design and use, different PTMS Electromagnetic Separator will differ in the specific workflow and sorting effect, but the whole is based on the basic principle of mineral magnetic difference, using magnetic field to separate materials with different magnetic properties. Permanent magnet cylinder magnetic separator according to the different groove body can be divided into downstream, countercurrent, half reverse current three types,

PTMS Electromagnetic Separator

The suitable particle size range of different PTMS Electromagnetic Separator is different, the suitable particle size of forward current type 6-0mm, reverse current type 0.6-0mm, and semi-reverse current type 0.15-0mm, which reflects the application differences of the working principle of magnetic separator in different structural design. The concentrate turns with the cylinder to the weakest magnetic force at the edge of the magnetic system, and is discharged into the concentrate tank under the action of the flushing water emitted from the discharge pipe. If it is a full magnetic roller, the unloading is carried out with a brush roller.

what is magnetic separation method in hindi ？

Non-magnetic or weak magnetic minerals are left in the slurry with the slurry discharge tank, that is, tailings. Nonmagnetic minerals such as gangue mixed in the "magnetic mass" or "magnetic chain" fall off in the turning over, and finally the "magnetic mass" or "magnetic chain" sucked on the surface of the PTMS Electromagnetic Separator cylinder is concentrate.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com