Graphite iron

Battery is good or not, also depends on the MATERIAL to give strength, regardless of the new MATERIAL to replace the old MATERIAL forward-looking, light is the original MATERIAL production, also need PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC process strictly controlled, only qualified MATERIAL, to create a qualified battery. In the process of making lithium iron phosphate cathode material, it is necessary to strictly monitor and measure all parameters in real time, including particle size, specific surface area, carbon content, vibration density, moisture and gram capacity.

PTMS MAGNETIC SEPARATOR

When a certain physical characteristic or physical behavior of the measured particle is the closest to a homogeneous sphere of a certain diameter, the diameter of the sphere is taken as the equivalent particle size of the measured particle. In actual production, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is often used for iron removal, and D10, D50 and D90 are commonly used for recording and checking.

what is magnetic separation？

The particle size of lithium iron phosphate is too small, the more particles of the same mass material, the more difficult it is to disperse under the same process conditions. If the particle size is too large, the diffusion path of lithium ion in lithium iron phosphate particles increases and the electrochemical reactivity decreases. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC is used to remove iron and dry powder. After testing, the finished product packaging equipment is used. After packaging, the powder can be sent to each battery factory.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com