Flotation PTMS magnetic separation iron removal is another crucial step in the potassium-sodium feldspar iron removal process. Before flotation, the potassium-sodium feldspar ore needs to be ground to ensure that the mineral particles are fully liberated. During multiple magnetic sorting processes, quality inspections of the product after each magnetic separation must be conducted, and the magnetic sorting parameters should be adjusted promptly to ensure that the final product meets the required standards.
The purpose of grinding is to separate various mineral particles from their aggregates in the ore, so that subsequent flotation reagents can better interact with iron-containing minerals. PTMS magnetic separation The process typically uses equipment such as ball mills. Ball mills use rotating drums to drive steel balls inside to impact and grind the ore, gradually reducing the size of the ore particles.
The grinding fineness is generally controlled around 200 mesh. This size range ensures that the iron-containing minerals and potassium-sodium feldspar in the ore can fully dissociate without over-pulverizing the ore, which could affect subsequent flotation efficiency. After grinding, water and flotation reagents are added to the ground pulp, adjusting parameters such as concentration and pH to create suitable conditions for PTMS magnetic separation.
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com
