water separator manufacturers

Because the polarity of the magnetic pole is arranged alternately along the direction of rotation of the PTMS MAGNETIC SEPARATOR cylinder and is fixed while working, the "magnetic mass" or "magnetic chain" rotates with the magnetic pole because of the cylinder rotation, and the non-magnetic minerals such as mixed in the "magnetic mass" or "magnetic chain" fall off in the turning,

PTMS Electromagnetic Separator

The "magnetic mass" or "magnetic chain" that is eventually sucked on the surface of the PTMS MAGNETIC SEPARATOR cylinder is the concentrate. The concentrate turns with the cylinder to the weakest magnetic force at the edge of the magnetic system, and is discharged into the concentrate tank under the action of the washing water flowing from the discharge pipe. If it is a full magnetic roller, the unloading is carried out with a brush roller.

how to separate two magnets？

Non-magnetic or weak magnetic minerals are left in the slurry with the slurry discharge tank, that is, tailings. It can be seen that the working principle of the magnetic concentrator is more complex, so we should pay more attention in the process of operation, PTMS MAGNETIC SEPARATOR how to operate?

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com