Graphite iron

Graphitization is the orderly transformation of thermodynamically unstable carbon atoms from disorderly layer structure to graphite crystal structure by thermal activation. Therefore, high temperature heat treatment is required to provide energy for atomic rearrangement and structural transformation during graphitization. In order to improve the graphitization of refractory carbon materials, PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal can also be performed with catalyst.

PTMS magnetic separator

Different quality of artificial graphite, the lifting and cooling rate, holding time, catalyst and so on are different, it is expected that the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC type is different, resulting in the performance and cost difference. The graphitization from the front and rear end process, especially the rising and cooling process, is basically programmed, but the graphitization time is long and the equipment investment is large, so it is more outsourced and there is no risk of technical leakage.

what is magnetic separation in Feldspar?

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC has been applied to secondary granulation technology for the first time. It has been used for high end consumer negative and fast charge low expansion power negative with very low expansion coefficient, which greatly improves the fast charge performance and cycle life of power batteries. Other anode companies also use machines for secondary granulation.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com