water cooling electromagnetic separator for Kaolin

Wet PTMS MAGNETIC SEPARATOR is mainly composed of six parts: cylinder, roller, brush roller, magnetic system, tank and transmission part. The cylinder consists of 2-3mm stainless steel coil welded into a cylinder, the end cover is cast aluminum parts or workpieces, and the cylinder is connected with stainless steel screws. The motor drives the cylinder, magnetic roller and brush roller to rotate through the reducer or the stepless speed regulating motor directly.

PTMS Electromagnetic Separator

The MAGNETIC system is an open magnetic system, housed in a PTMS MAGNETIC SEPARATOR cylinder and a bare full magnetic system. The magnetic block is mounted on the bottom plate of the magnetic yoke with a stainless steel bolt, the shaft of the magnetic yoke extends out of the cylinder, and the shaft end is fixed with a crank arm. The swing arm can adjust the magnetic system deflection Angle, and can be fixed with a pull rod after proper adjustment. The working area of the tank body is made of stainless steel plate, and the rest of the frame and tank body are welded with ordinary steel.

what is magnetic separation process？

Advance and lift the machine according to the geographical situation, the action should be flexible, and the hopper must be cleaned if there are large stones, mud, etc. Always check PTMS MAGNETIC SEPARATOR related chain screws, pins and fixed point fasteners of the transmission system must be firm.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com