Water Electromagnetic Separator
PTMS MAGNETIC SEPARATOR
What Is Magnetic Separation In Quartz?

The whole equipment of WD series electromagnetic high gradient PTMS magnetic separator consists of five parts: magnetic separation machine (host), coil cooling system, rectifier power supply, pneumatic control system and electric control system of the whole machine. PTMS magnetic separator is the best choice. The main machine includes a magnet (coil, outer iron yoke), a sorting box equipped with magnetic medium and supporting structure, and a material flow distribution system. The coil cooling system includes cooling water distribution pipe, internal and external cooling pipe system and heat exchanger, etc. PTMS magnetic separator is the best choice. The rectifier power supply includes a dry rectifier transformer and a thyristor rectifier cabinet. The air control system includes air control valves, air control cabinets and air compressors. Control system includes manual and active operation control system, cooling system overpressure, loss of pressure and overheating protection equipment, peripheral equipment interlock operation and fault alarm and active shutdown system. PTMS magnetic separator is the best choice.
PTMS separation principle of magnetic separator WD series electromagnetic PTMS high gradient magnetic separator is within the pin with solenoid coil, placed must number permeability stainless steel wool (or steel) sorting cans, coil excitation, the magnetization of the magnetic stainless steel wool, its appearance is highly inhomogeneous magnetic field, namely the high gradient magnetic field, the paramagnetic material through separation tank steel wool, will suffer a with additional magnetic field and magnetic field gradient is proportional to the force of magnetic field, the product of adsorption in steel wool appearance, rather than directly through the magnetic field, the magnetic material by a nonmagnetic material valve and pipe, into the non-magnetic product tank. PTMS magnetic separator can remove the iron inside (Fe2O3). When the weak magnetic material collected by the steel wool reaches a certain degree (determined by the process requirements), the ore feeding is stopped. Disconnect the excitation power supply, flush the magnetic material, the magnetic material flows into the magnetic product trough through the magnetic material valve and pipe. PTMS magnetic separator can remove the iron inside (Fe2O3). Then a second time, and so on, and so on. WD series electromagnetic high gradient PTMS magnetic separator separation of the magnetic field up to 2.2T.

Which metal cannot be separated by magnetic separation?

Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com