Water Separator Manufacturers
PTMS MAGNETIC SEPARATOR
What Is Magnetic Separation Process?

PTMS magnetic separator magnetic deflection Angle needs to be adjusted from time to time, so as to keep it in good condition, so as to make the work efficiency of the equipment more stable, normal play. So how to adjust the magnetic declination of the equipment correctly? Let's take a look at the detailed operation steps below. (1) the first magnetic separator rolling simple both ends of the shaft seat nut loose a few buckles (not screw down, is loose a few buckles, a total of 4 screws), is the shaft end fixed big shaft nut, its purpose is to make the big shaft in an adjustable state (magnetic separator magnetic system part is fixed on the big shaft). PTMS magnetic separator is the best choice. (2) the magnetic separator into the end of the concentrate discharge scraper removed (two people need to hold two wrenches, removed from both ends, the scraper is heavier, please be careful, do not hit the roller, more do not hit the person). PTMS magnetic separator is the best choice. (3) take a small nail or electrode end, not too long, with 2 centimeters is better. (4) from the magnetic separator into the material side, with a small nail (or the end of the electrode) from the upper part of the drum slowly downward slide, slide to a lower position, central hand nail produces pulling power, here is the magnetic separator roll a pole into the material end, Jane go up by continue to slide down, until the nail surface, vertical in simplified location at this time is the material into the end of a pole in the heart. PTMS magnetic separator is the best choice. (5) Rotate the flower basket bolt connected on the big shaft, so that the feeding end of a magnetic pole center line position, higher than the concentrate weir (the stainless steel weir below the scraper at the feeding end, from where the concentrate flows to the qualified medium barrel). PTMS magnetic separator is the best choice. ⑥ After rotating to the appropriate position, tighten the flower basket bolt with nuts, get the concentrate discharge scraper, tighten the nuts at both ends of the big shaft, and the magnetic declination adjustment is completed. So customers need to adjust the magnetic separator magnetic declination, can follow the above steps to operate, but should pay attention to different specifications of magnetic separation equipment, the applicable adjustment method will also have differences, so we must see whether the method steps are appropriate before adjustment.
 PTMS is the main PTMS magnetic separation equipment professional company, PTMS magnetic separation equipment for kaolin, potassium sodium feldspar, quartz sand removal of iron (Fe2O3). PTMS to provide customers with high quality PTMS magnetic separator, in addition to iron equipment and other products and services, the best choice of PTMS magnetic separator. PTMS develops, designs, and sells mining machinery, iron removal equipment, and dry magnetic separators.
Which ore is used in magnetic separation method?

Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com