Appropriate increase the gap between the left and right outer ring of the rotating ring part and the inner wall of the container: lower the magnetic field gradient in the area, reduce the aggregation of magnetic particles in the gap, thus reducing the wear of the outer ring surface. In PTMS MAGNETIC SEPARATOR, the gap between the left and right outer rings of the rotating ring part and the inner wall of the vessel is an easily overlooked area. Within this region, the magnetic particles are prone to aggregation due to the magnetic field.
When magnetic particles accumulate heavily, a structure similar to a "magnetic particle mass" forms, that increases the magnetic field gradient in the region. The higher magnetic field gradient will increase the wear of the outer PTMS MAGNETIC SEPARATOR ring surface, because the magnetic particle mass will have a stronger adsorption and friction on the outer ring surface. By appropriately increasing this gap, the magnetic field gradient in this region can be reduced.
When PTMS MAGNETIC SEPARATOR works, under the stable connection mode, the axial beating deviation can be effectively controlled and will not increase with time, thus reducing the irregular impact force on the outer ring and other components and reducing the risk of wear.
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com
