High quality magnetic separator

In using the lithium battery anode material screen in addition to iron PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC device, first put the device in the required place, connected to the external power supply, the lithium battery anode material through the feed port into the bearing box, anode material fell on the drainage plate, start the vibration motor, vibration motor drive vibration, and slide in the slide,

PTMS Electromagnetic Separator

Drainage plate on the left side of the rotation under the action of the shaft, thus the vibration of the drainage plate play a certain auxiliary role, material to the right, at the same time the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC electromagnet plate electricity, cathode material in the process of falling, the doping iron scraps can be adsorbed on the left side of the electromagnetic iron plate, when the left side of the electromagnetic iron plate set with iron chips,

what is magnetic separation process？

Start the motor, motor drive motor shaft rotation, thus drive the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC electromagnet plate turn 180 degrees, to the left of the electromagnet plate rotation to the right, and the power, iron chip in the iron box, at the same time at the opening of the electromagnetic plate work, after the left to pull the box from the outlet, convenient to take out the material, then remove the iron box can be centralized processing of iron chips, this is the whole work.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com