A power box is installed on the bottom of a PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic removal box. The power box is connected to the conductive clip frame through a wire. The power box provides power for the conductive clip frame. The electromagnetic board is placed between two conductive sandwich frames and the contact position of the electromagnetic plate and the conductive sandwich frame is a conductive copper sheet. When the conductive sandwich frame is energized by the electromagnetic plate, the electromagnetic plate generates magnetism.
At this time, the crushed battery material falls on the electromagnetic plate from the upper funnel tube and slides to the right along the electromagnetic plate, because the electromagnetic plate is magnetic, the iron slag in the battery material is absorbed, so as to remove the iron in the battery material; The door is inserted on the upper side of the left end face of the iron removal box and the door is fixed on the left end of the electromagnetic plate. The door is easy to open. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic box is easy to remove the electromagnetic plate and dispose of the iron debris.
The left end face of the door is provided with a handle, which is convenient for workers to pull out the electromagnetic plate; There are a number of rollers, which are arranged horizontally between the front and back side walls of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic box and the side of the roller is attached to the end face of the electromagnetic plate, and the roller rotates to push the battery material stuck on the end face of the electromagnetic plate to the right;
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com