kaolin clay magnet requirements

The power box is arranged on the bottom of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic removal box, and the power box is connected with the conductive clip frame through a wire. The electromagnetic plate is placed between two conductive clip frames, and the contact position between the electromagnetic plate and the conductive clip frame is a conductive copper sheet; The door is inserted on the upper side of the left end face of the iron removal box, and the door is fixed on the left end of the electromagnetic plate;

PTMS magnetic separation

There are a number of rollers, which are arranged horizontally between the front and back side walls of the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC magnetic box and the side of the roller is attached to the end face of the electromagnetic plate; A number of second motors are arranged on the rear end face of the iron removal box, and the main shaft of each second motor corresponds to the column shaft connected with each roller; The discharge port is arranged on the right wall of the iron removal box at the height of the right end of the electromagnetic plate; The drawer box is inserted on the lower right side of the discharge port.

what is magnetic separation process ？

The distance between the inner side wall of the funnel barrel and the side wall of the conical wheel column gradually decreases from top to bottom. The left end face of the door is provided with a handle. The outer surface of the roller is covered with a brush. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC field The outer cover of the discharge port is provided with a dust box.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com