Graphite iron

When the anode material of iron (Fe), copper (Cu) and chromium (Cr), nickel (Ni), zinc (zinc), silver (Ag), and other metal impurity, battery into phase voltage after reaching the REDOX potential of metal elements, the metal will be first in the anode oxidation to the cathode reduction, when the cathode in metal elemental accumulated to a certain degree, The hard edges of the deposited metal can puncture the diaphragm, causing the battery to self-discharge. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal effect is good

PTMS MAGNETIC SEPARATOR

Self-discharge has a fatal effect on LITHIUM ion battery, so it is particularly important to prevent the introduction of metal foreign bodies from the source, and it is very necessary to remove iron from PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC.

what is magnetic separation method？

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal filter system

LITHIUM COBALT ACID MATERIAL MAGNETIC removal iron filtration system is to filter the iron in the ternary cathode MATERIAL. When the raw MATERIAL enters the main filter net, part of the fine iron filings will be absorbed by the MAGNETIC like ferromagnetism. Through MAGNETIC adsorption of iron, the iron can be filtered. Then through the filter, so that the three positive material force inside the paste is out.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com