Magnetic Magnetic Separator
PTMS Magnetic Separation
What Is Magnetic Bead Separation?

In recent years, the magnetic separation of kaolin, potassium sodium feldspar, quartz sand weak magnetic minerals has been a hot and difficult problem in the field of magnetic separation, because its susceptibility or magnetic field magnetic induction intensity can not meet the requirements, resulting in a low recovery rate of magnetic separation (separation in a strong magnetic field). PTMS magnetic separator can remove the iron inside (Fe2O3). PTMS high gradient magnetic separator has greatly improved the recovery rate of weak magnetic minerals, but there are problems such as powder inclusion and medium blockage, which leads to the reduction of mineral grade after separation. PTMS magnetic separator can remove the iron inside (Fe2O3). In the magnetic separation process of kaolin, potash albspar and quartz sand weak magnetic minerals, PTMS has optimized the necessity of high intensity magnetic separation equipment. PTMS has obtained the best process parameters through experiments to guide the separation of kaolin, potash albspar and quartz sand weak magnetic minerals. In addition, a reasonable theoretical analysis is made on the dynamic equation, velocity and trajectory of the ore particles in the process of magnetic separation, which plays a certain role in promoting the improvement of the recovery rate and grade of the magnetic separation of weakly magnetic minerals.

PTMS magnetic separation equipment
PTMS in the process of resolving the low recovery of weak magnetic minerals, PTMS magnetic separation equipment has undergone a replacement. PTMS high magnetic field magnetic separator is the key equipment for sorting weak magnetic minerals, which can be divided into PTMS dry high magnetic field magnetic separator, PTMS wet high magnetic field magnetic separator and PTMS high gradient magnetic separator. PTMS magnetic separator can remove the iron inside (Fe2O3).

PTMS dry high intensity magnetic separator can be divided into disk type, roller type, cylinder type, among them, the more widely used is roller type. PTMS produces a reciprocating dry permanent magnet high gradient magnetic separation machine, adopt sealed magnetic system design, no leakage, sorting spatial gradient of the magnetic induction intensity can reach 1.5 T and above, has great depth of field, sorting operation continuously, low energy consumption, high background field strength, simple structure and convenient operation and maintenance, suitable for kaolin clay, sodium, potassium feldspar, Separation of weak magnetic minerals of quartz sand and purification of nonmetallic minerals.

PTMS wet high magnetic separator can be divided into PTMS permanent magnet wet high magnetic field separator and PTMS electromagnetic wet high magnetic field separator. PTMS wet high magnetic field separator is the use of magnetic media, is a strong magnetic field separator in a major breakthrough. PTMS magnetic separator can remove the iron inside (Fe2O3).

PTMS high gradient magnetic separator has PTMS cycle type high gradient magnetic separator, PTMS continuous high gradient magnetic separator, PTMS vertical ring pulsating high gradient magnetic separator, PTMS double vertical ring magnetic separator, PTMS gas and water combined unloading double vertical ring high gradient magnetic separator.

what is magnetic bead separation？

Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com