electromagnetic separator

First, the raw ore below 8mm is sent into the upper hopper, and after the vibration motor vibrthe cloth, the output can be accurately adjusted through the hand wheel. The magnetic roll is dragged by the speed regulating motor, and the speed can be adjusted by the speed gauge, which can control the yield and concentrate grade of PTMS magnetic separation.

PTMS Electromagnetic Separator

Mineral into PTMS magnetic separation sorting, because of iron ore ore magnetic, immediately by strong magnetic field adsorption on the magnetic roll, Pulse stone particles (mixed stone, sand) for not have magnetic (magnetic is very weak), the magnetic roll of magnetic it does not produce suction, with the rotation of the magnetic roll, ore has been sucked on the magnetic roll, and gangue in magnetic roll to the front position was thrown out in front of the partition plate (by changing the size of the partition plate Angle can adjust the grade of concentrate), ore continue to be magnetic roll to remove magnetization area automatically fall into a collection bucket collection for concentrate products.

what is magnetic bead separation？

Because the upper magnetic roller also contains some weaker magnetic particles, they will enter the lower magnetic roll to continue magnetic separation, the magnetic particles into the secondary mineral bucket to collect as the finished product, the thrown gangue is discharged through the tailings, to the end of the PTMS magnetic separation process.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com