Permanent magnet magnetic separator

PTMS magnetic separation Drum surface is strictly prohibited to knock and impact, to often check the wear of the magnetic barrel, when the outer skin wear depth exceeds 1 mm should be replaced in time; often clean the magnetic roll surface adsorption on the iron to reduce wear, excessive iron will cause huge resistance seriously affect the magnetic selection effect; magnetic card, mobile phone, watch and other magnetized items do not approach the magnetic roll.

PTMS Electromagnetic Separator

No ferromagnetic property (above 1 mm) close to PTMS magnetic separation magnetic roll surface to avoid equipment damage, larger iron may be absorbed to the drum may not be able to remove; often check the fixing screws in each part to avoid loosening and equipment failure;

what is magnetic separation in Quartz ？

The concentrate turns to the weakest magnetic force at the edge of the magnetic system with the PTMS magnetic separation cylinder, and is discharged into the concentrate tank under the action of the flushing water flowing from the discharge pipe. If it is a full magnetic roller, the unloading is carried out with a brush roller. Non-magnetic or weak magnetic minerals are left in the slurry with the slurry discharge tank, that is, tailings.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com