Расположение: Дом > Новости
The Characteristics Of PTMS Electromagnetic Magnetic Separator
Время: 2021-04-18

Magnetic Separation Process
What Is Magnetic Separation Method For Concentration Of Ore?

PTMS dry magnetic separator and PTMS wet magnetic separator is mainly based on the magnetic magnetism of the magnet to generate suction, and the kaolin, potassium sodium feldspar, quartz sand powder and other ingredients are selected out. PTMS magnetic separator is the best choice. But the conventional magnetic separator magnetic separation process and method is not suitable for a small number of, or more complex components of the ore, therefore, PTMS electric separation method sometimes has different applications and effects.

PTMS electrical separation process
PTMS electrical separation is based on the separation of minerals and materials with different electric charges under the action of external electric field. Electroseparation method uses kaolin, potash albspar, quartz sand materials inherent in different triboelectric properties, electrical conductivity and dielectric properties. PTMS magnetic separator is the best choice. PTMS magnetic separator because the electrostatic force is proportional to the particle surface charge size and electric field intensity, so the electrostatic force on the fine, sheet of light particles. Therefore, the particles can be separated efficiently.

PTMS magnetic separator magnetic separation equipment
1, PTMS wet weak magnetic field permanent magnet drum type magnetic separator. This magnetic separator is mainly used for sorting kaolin, potassium sodium feldspar, quartz sand and other strong magnetic materials.
 2, PTMS electromagnetic magnetic pulley. The equipment is composed of multipole magnetic system with alternating polarity or single polarity along the direction of material movement. The magnetic induction intensity of PTMS magnetic pulley can reach 0.1 ~ 0.15T, and the feeding particle size can reach 10 ~ 100mm. The size of the pulley is ¢×L(600 ~ 1000)×(1700 ~ 2400)mm. Its role in the concentrator and PTMS magnetic separator pulley the same.
 3, PTMS permanent magnet drum type magnetic separator. Equipment structure: the main part of the cylinder and the magnetic system. Magnetic system and magnetic field characteristics: magnetic system is strontium ferrite. Application: dry separation of fine strong magnetic mineral particles, purification of magnetic materials, removal of magnetic impurities from powdery materials such as kaolin, potassium sodium feldspar and quartz sand.
 4, PTMS wet weak magnetic separator. The equipment is composed of three main parts: cylinder, magnetic system and tank.
 5, PTMS superconducting high gradient magnetic separator. Equipment structure: periodic superconducting high gradient magnetic separator is a set of superconducting magnetic filter. The main parts are superconducting coil, refrigeration mechanism, sorting mechanism, ore feeding mechanism, etc.

PTMS electrical separation equipment
PTMS electrical separation equipment is based on the electrostatic force applied to the temporary charged particles. The design of PTMS electrical separator is based on the charging mechanism of minerals. PTMS magnetic separator is the best choice. According to the charging mechanism, the magnetic separator can be divided into the following three categories:
1, free fall electrostatic sorting machine (contact charged and friction charged). Magnetic separator In such an electrical separator, the particles gain an electric charge by contact or friction with one another or a third material. The particles then enter an electric field and separate according to how polarized they are and how much charge they carry.
2, high voltage sorter (corona charged).
3, contact electrical sorting machine (conduction induction charged). When the particles and conductive electrode contact, magnetic separator in the electric field can be separated from the conductor and non-conductor, this is the basis of conductive electrical sorting machine. When there is a high voltage electric field, different particles contact with the grounding conductor, can be conductive induction charge. PTMS magnetic separator is the best choice. Usually by conduction, the conductor particles are charged rapidly, while the insulating particles are charged much more slowly, separating the conductor particles from the insulating particles.

what is magnetic separation method for concentration of ore?

Contact: DELLA
Mob: +86-13929907491

Подписаться на новости

Foshan Powtech Technology Company Limited.

Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China

Тел. : +86 -13929907491

Эл. адрес : sales@ptmsmagnet.com

Веб-сайт : https://www.dellamagnet.com

Авторское право © Foshan Powtech Technology Company Limited. Сохранить все права.   Sitemap   XML