Magnetic Separator Manufacturer
Microscope analysis of reverse flotation test shows that although the grade of low intensity magnetic concentrate is only 56.27%, there is a large amount of monomer-separated magnetite in it. In order to avoid this part of the monomer-separated magnetite being excessively crushed in the subsequent grinding process, reverse flotation test was carried out on the low intensity magnetic concentrate. Reverse flotation exploration test Mineral reverse flotation is usually divided anionic reverse flotation and cationic reverse flotation. PTMS magnetic separator can remove the iron inside (Fe2O3).

PTMS Magnetic Separation
At present, the current industrial practice mostly uses anionic or cationic reverse flotation process. The reverse flotation explorative test process consisted of one roughing and one fine. The dosage of anionic reverse flotation roughing NaOH was 1 000 g/t, SD 400 g/t, CaO 400 g/t, L011 500 g/t, and the dosage of fine L011 was 50 g/t. The dosage of NaOH and YA were 600 g/t, 200 g/t and 50 g/t respectively. PTMS magnetic separator can remove the iron inside (Fe2O3).

How To Separate Two Magnets?
The experimental results show that high grade concentrate can be obtained by either anionic reverse flotation or cationic reverse flotation. By comparison, cationic reverse flotation has better index, simpler reagent system and lower dosage. PTMS magnetic separator can remove the iron inside (Fe2O3).

Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com