wet separator

For the PTMS MAGNETIC SEPARATOR type of iron removal equipment, check the magnetic roll, conveyor belt and other components. Whether the surface of the magnetic roll is worn or the adsorption of foreign bodies, if the surface wear of the magnetic roll may affect the distribution of the magnetic field, and then reduce the effect of iron removal. The tension of the conveyor belt should be moderate, and too loose may lead to the skid phenomenon during the transmission process, affecting the normal transportation of the material; too tight will increase the wear of the conveyor belt and shorten its service life.

PTMS Electromagnetic Separator

At the same time, check whether there are cracks or damage on the conveyor belt. Once found, it should be repaired or replaced in time to prevent material leakage in the operation process. In the flotation PTMS MAGNETIC SEPARATOR equipment, the agitator is the key component. Check whether the blade of the mixer is firm and has any deformation or corrosion phenomenon.

what is magnetic separation？

The damage of the blade will affect the stirring effect of the pulp, making the flotation agent cannot be fully mixed with the pulp, and reducing the efficiency of PTMS MAGNETIC SEPARATOR iron removal. In addition, the flotation tank should also be checked for leakage, because the leakage will cause the ore slurry level instability and affect the normal operation of the flotation process.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com