Glass ribbon coated with epoxy resin, iron packing tape and stainless steel plate were used to wrap the whole MAGNETIC system. According to the test results, PTMS MAGNETIC SEPARATOR was wrapped with 0.5 thickness stainless steel plate. The joints at both ends of the stainless steel plate are clamped with thin plates and fixed with bolts, and finally connected with bolts to adjust the tightness.
This not only has little effect on the surface magnetic field of the magnetic system, but also has a strong enough wrapping and tightening force on the magnetic system, and the effect is remarkable. After adopting this method, the magnetic block has never fallen off, and the problem of magnetic system fixing has been completely solved. PTMS MAGNETIC SEPARATOR is mainly composed of feed hopper, permanent magnet separator, eccentric vibrating feed plate, disk drive device, electromagnetic system and frame.
PTMS MAGNETIC SEPARATOR is an important member of the magnetic separator family, but at present there are many friends who are not familiar with the rising star in this magnetic separator. In order to make you more careful when buying this equipment, we take you to understand the basic components of the magnetic separator and the working process.
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com
