water cooling electromagnetic separator for mining

PTMS MAGNETIC SEPARATOR The bearing is the key supporting part for the normal operation of the whole equipment. In the process of the continuous work of the magnetic separator, the bearing bears the forces from all directions, including the gravity of the magnetic separator itself, the centrifugal force generated by the rotation of the rotor and the reaction force of the material on the equipment. Therefore, the good condition of the bearing is crucial for the stable operation of the magnetic separator.

PTMS MAGNETIC SEPARATOR

PTMS MAGNETIC SEPARATOR After 300 hours of working time, the bearing should be cleaned. This is because in the long operation process, the bearing will accumulate some dust, impurities and wear debris. If these foreign bodies are not removed in time, they will increase the wear of the bearing, reduce its service life, and may affect the lubrication effect of the bearing.

what is magnetic separation method for concentration of ore？

Cleaning PTMS MAGNETIC SEPARATOR bearings requires the use of special cleaning tools and cleaning agent. Operators should carefully clean all parts of the bearing to ensure that there are no impurities left. If the bearing is oil lubrication, it is appropriate to fill one third of the gap of the bearing seat, not more than half at most.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com