Расположение: Дом > Новости
Advantages Of PTMS Multi-pole Magnetic Separator In Application
Время: 2021-04-03

Electromagnetic Separator Manufacturer
What Is Magnetic Separation Method?

Since PTMS drum magnetic separator production application, through continuous improvement, to make it more suitable for the needs of the mill plant, from the perspective of the magnetic system structure did not change too much, usually for 4 ~ 6 open its magnetic department of pole group, to improve the table of the depth of an applied magnetic field and magnetic field, usually break embedded in the pole group wedge magnets, so increased the depth of field, magnetic field in the circumferential direction of the magnetic department curve is very uneven, in the process of concentration of conveyor and discharge increase the circumferential tangential retention force too much, to a large extent affected the classification accuracy of the equipment.

In order to reduce the inhomogeneity of the circumferential magnetic field as much as possible, the number of magnetic poles, the width of the pole surface and the matching parameters were designed by summarizing the previous work and using the method of numerical simulation comparison, and a new magnetic field distribution was obtained, which made the circumferential magnetic field distribution more uniform.

Technical parameters of PTMS multi-pole magnetic separator

An industrial test was carried out in the first workshop of a large concentrator, in which the 4 pole magnetic system PTMS cylinder type low intensity magnetic separator and PTMS1 500mm vertical ring pulsating high gradient magnetic separator were combined to replace the permanent magnet cylinder type scanning magnetic separator. The problem of low separation efficiency of 4-pole permanent magnet cylindrical low intensity magnetic separator was exposed in the industrial test. This large-scale concentrator decided to replace 4-pole permanent magnet PTMS cylindrical low intensity magnetic separator with multi-pole magnetic system through the test. After a careful study of the field processing conditions and ore properties, PTMS multi-pole magnetic system was used on the basis of the test. The main parameters are as follows: there are 10 magnetic poles on the cross section, the magnetic enveloping Angle is 155°, the pole width is 100mm, and the pole gap is 44mm.

PTMS is the main PTMS magnetic separation equipment professional company, PTMS magnetic separation equipment for kaolin, potassium sodium feldspar, quartz sand removal of iron (Fe2O3). PTMS to provide customers with high quality PTMS magnetic separator, in addition to iron equipment and other products and services, the best choice of PTMS magnetic separator. PTMS develops, designs, and sells mining machinery, iron removal equipment, and dry magnetic separators.

what is magnetic separation method ?

Contact: DELLA
Mob: +86-13929907491

Подписаться на новости

Foshan Powtech Technology Company Limited.

Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China

Тел. : +86 -13929907491

Эл. адрес : sales@ptmsmagnet.com

Веб-сайт : https://www.dellamagnet.com

Авторское право © Foshan Powtech Technology Company Limited. Сохранить все права.   Sitemap   XML