Dry Magnetic Separator
PTMS Magnetic Separation
How To Separate Two Magnets ?
Different magnetite concentrators adopt different technological processes due to the different properties of kaolin, potassium sodium feldspar and quartz sand ores. However, for magnetite concentrators that adopt fine crushing process, stage grinding and stage separation process, the process link and the separation link have common characteristics. After finely into the ground before and after a period of grinding and classification, the second period of grinding and classification, the final separation section and so on various assignments, all have the separation conditions, link in these have separation conditions, adopt corresponding separation equipment to fully qualified aside from tailings as far as possible, from the two aspects of technology and economic benefits are very reasonable and valuable. It is the premise and foundation for the production of PTMS special magnetic separation equipment to study the mineral process conditions and separation requirements carefully by reasonably dividing the common and universal separation links, and to study the corresponding separation mechanism and equipment structure accordingly. PTMS magnetic separator can improve the whiteness of products.
According to the kaolin, potassium sodium feldspar, quartz sand mineral processing conditions (feeding particle size, concentration, ore amount, etc.) and separation requirements of the same,PTMS magnetic separator can improve the whiteness of products. The different operations of magnetite concentrator are divided into four representative separation links.
(1) Pre-selection before grinding after fine grinding.
(2) Rough separation after a stage of grinding and classification.
(3) secondary magnetic separation after the second stage of grinding and classification and three times of cleaning after screening.
(4) Sweeping and beneficiation, controlling tailings loss and tailings re-beneficiation when failure occurs.
The four separation links, covering the separation conditions and separation value of magnetite concentrator at present. On this basis, the production of PTMS special magnetic separator with targeted design, including :① PTMS pre-selection with cylinder magnetic separator series. For kaolin, potassium sodium feldspar, quartz sand minerals after grinding into the pre-selection,PTMS magnetic separator can improve the whiteness of the product. (2) PTMS roughing drum type magnetic separator, used for a rough separation of a stage of grinding classification overflow; PTMS magnetic separator can improve the whiteness of products. (3) PTMS cylinder type magnetic separator, used for the second stage of grinding and classification of overflow and the final separation of the selected section; PTMS magnetic separator can improve the whiteness of products. (4) The cylinder magnetic separator is used for PTMS tailings to sweep and control the loss of tailings when a fault occurs. PTMS magnetic separator can improve the whiteness of products.
how to separate two magnets?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com