Magnetic separation machine

After the full magnetic PTMS MAGNETIC SEPARATOR drum skin is worn out, the pulp will enter the drum, which will adsorb on the surface of the magnetic system, leading to the death between the barrel and the magnetic system, or the pulp into the bearing bearing damage, to make the whole machine damage can not work normally. The normal maintenance requirement of magnetic separator magnetic drum has the following points:

PTMS Electromagnetic Separator

According to PTMS MAGNETIC SEPARATOR's own conditions, a small-scale maintenance should be carried out every six months. The specific maintenance contents are: do not disassemble the gear in the cleaning cylinder, (cycloid wheel or planetary wheel) and the supporting and running parts, replace the cooling lubricating oil fluid, etc. Ensure moderate maintenance at least once a year according to actual use.

what is magnetic separation in Feldspar？

PTMS MAGNETIC SEPARATOR The specific operation content of maintenance is: remove the support, end cover, cylinder, clean the cylinder body wall and transmission body, check the wear of gear, cycloid wheel and bearing. Check the stress parts, whether the keys and keys are deformed, whether the oil seal is worn, etc. Large-scale maintenance is usually done once every two years.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com