When the acceleration of the material is too high, magnetic minerals may not be captured by the magnetic field in time and may leave the sorting area with the material flow, leading to a decrease in the recovery rate of magnetic minerals. Therefore, it is necessary to optimize the PTMS MAGNETIC SEPARATOR feeding method to improve the sorting effect. Through the study and analysis of the material's motion state, we have proposed several optimization schemes for the feeding method.
The material is evenly dispersed on the surface of the cylinder by means of decentralized feeding to reduce mutual interference between the materials; the feeding speed and Angle are adjusted so that the materials can enter the sorting area at an appropriate speed and Angle, fully subjected to the action of the magnetic field. In practical application, these PTMS MAGNETIC SEPARATOR optimization schemes have achieved remarkable results.
By optimizing the ore feeding method, the sorting efficiency of PTMS MAGNETIC SEPARATOR has been significantly enhanced, leading to a substantial increase in the recovery rate and grade of magnetic minerals. This also lays the groundwork for the intelligent control of magnetic separators. In the future, sensors can monitor the material's movement and sorting performance in real time, allowing for automatic adjustments to the ore feeding method, further enhancing the efficiency of magnetic separators.
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com
