permanent magnet magnetic separator

First, agents like ferric chloride are inherently expensive and classified as hazardous chemicals. Their transportation requires specialized vehicles and strict safety protocols, resulting in persistently high logistics costs. Second, storing these agents necessitates corrosion-resistant facilities and dedicated personnel management, which increases both fixed investments and operational burdens. The integrated PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC electric ironing system addresses these challenges through a comprehensive solution.

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC

The use of chemical reagents presents a more severe challenge. On average, 25-40 mg/L of ferric chloride is consumed per ton of electrolyte solution processed. With an annual production capacity of 10,000 tons, the annual reagent expenditure could exceed tens of millions of yuan, accounting for over 50% of total iron removal costs, which has become an unbearable burden for enterprises. By introducing an integrated PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC electro-deionization system, as demonstrated in a nickel-cobalt-manganese ternary precursor manufacturing plant, the annual electricity consumption in iron removal processes has been reduced compared to previous methods, with electricity expenses decreasing by 30% compared to original practices.

what is magnetic separation in nickel cobalt manganese ternary ？

In addition, in order to further improve the iron removal efficiency of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC, some factories use enhanced methods such as high temperature vacuum distillation or high pressure oxidation. These processes can improve the impurity removal rate, but their energy consumption per unit treatment is often more than 300kWh/ton, which is far lower than the industry average level.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com