magnetic separator factory

Ideally, the device should be positioned at the most concentrated and stable location of the material flow, as close as possible to the bottom of the material layer. Since most ferrous materials have high density, they tend to accumulate in the lower layers. Reducing the distance between the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC and the material base by 10cm can increase adsorption force by 15% -20%. However, position adjustments must be carefully calibrated to prevent large material chunks from colliding with the magnetic poles due to excessive proximity, which could damage equipment or scratch conveyor belts.

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC  

The recommended minimum safety distance is typically 10-15 cm, with buffer rollers or flow guide plates installed to protect the PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC equipment. For conveyor belts with significant inclinations, the gravitational component's influence on iron particle trajectories must be considered. When necessary, adopt dual-side or multi-point configurations to expand coverage. In complex operational conditions, using a multi-stage desulfurization system becomes essential as standalone desulfurizers often fail to meet comprehensive requirements across all scenarios.

what is magnetic separation used for？

The multi-stage PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC iron removal system employs a "pre-removal + precision removal" combination to purify materials step by step. The first stage uses high-power permanent magnet drums for preliminary screening of large iron objects. The second stage utilizes electromagnetic PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC to remove medium-sized iron components, while the third stage features metal detectors and pneumatic removal devices specifically designed for capturing fine iron particles.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com