Construction muck contains more impurities, especially more iron impurities. The traditional iron removal mainly adds acid into the slurry of kaolin by pickling kaolin, and the reaction stands for 8-10h, and then injects a lot of clear water out of the water, but this method takes too long and the production efficiency is low. PTMS Electromagnetic Separator Iron (FE2O3) can be removed from the kaolin.
The slurry was introduced into the permanent magnet high gradient PTMS Electromagnetic Separator to obtain the coarse selected slurry. Sulfur acid, sulfuric acid and oxalic acid were mixed into the slurry obtained after initial magnetic processing. The pickling was performed for 25 – 45 min. Screening was performed by a spiral grader.
Through the preparation of slurry residue size screening, preliminary in addition to the magnetic processing, chemical purification processing steps for the construction waste kaolin as raw material, the purpose of the entire PTMS Electromagnetic Separator preparation process is simple, and effectively remove the impurities in the construction residue, especially iron impurities, overcome the construction waste soil is waste technology bias;
Contact: DELLA
Mob: +86-13929907491
Адрес : No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Тел. : +86 -13929907491
Эл. адрес : sales@ptmsmagnet.com
Веб-сайт : https://www.dellamagnet.com
