magnetic equipment

The PTMS magnetic separation process is suitable for simple water washing to remove clay minerals. Generally, the particle size range of quartz sand is 0.075-1.0mm, while the particle size of clay minerals is less than 50μm, generally less than 20μm.

PTMS Electromagnetic Separator

Advanced coarse screen out the grit, remove the grit with a diameter of 5cm. Use a wet screen of 0.5-1.0mm to remove the coarse sand that impedes glass production. So that quartz sand and clay minerals can be separated from each other in the water medium. Different equipment can be used for cleaning, such as cleaning tank, cyclone, upflow hydraulic classifier, etc. The upwelling water PTMS magnetic separation is now used more often, and the fine minerals are discharged from the top overflow port in the form of mud, while the coarser and heavier particles are discharged from the bottom.

what is magnetic separation used for？

Gravity separation PTMS magnetic separation Scope: When the iron in quartz sand is mainly in the form of heavy minerals (minerals with a relative density greater than 2.9), gravity separation should be considered. The criterion of gravity separation :E=(density of heavy mineral - density of medium)/(density of light mineral - density of medium). When E is greater than 2.5, it is easy to re-select and separate. When the value is lower, the redistribution efficiency decreases. When the value is less than 1.25, it is not suitable for gravity beneficiation.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com