Graphite iron

The pulverized MATERIAL is transported to PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC classification area by updraft. Fine powders that meet the particle size requirements are screened by horizontal grading channels. Coarse powders that do not meet the particle size requirements are returned to the grinding area for further grinding. The qualified fine powder enters the efficient cyclone separator with the air flow to be collected, and the dusty gas is filtered and purified by the dust collector before entering the atmosphere.

PTMS MAGNETIC SEPARATOR

After mixing the pulverized and PTMS LITHIUM iron phosphate powder with MAGNETIC classification, the powder is graded according to the particle size, and the particles that are too large are re-graded according to our needs. Powder mixing equipment is often used in the pharmaceutical industry, the common mixing equipment is double helix cone mixing, horizontal gravity mixing machine, horizontal plow knife mixing machine.

what is magnetic bead separation？

Qualified LITHIUM iron phosphate powder after PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal is baked to remove moisture. A PTMS double cone dryer is generally used. The working principle is: the double cone dryer is a double cone rotary tank. In the vacuum state, steam or hot water is heated into the jacket, and the heat is contacted with the wet material through the inner wall of the tank. The water vapor evaporated from the wet material after heat absorption is removed by the vacuum pump through the vacuum exhaust pipe. Because the tank is in a vacuum state, and the tank's rotation makes the material constantly up and down, inside and outside turning, so it speeds up the drying speed of the material, improves the drying efficiency, and achieves the purpose of uniform drying.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com