magnetic separation diagram

PTMS Electromagnetic Separator should pay attention to the following aspects in the switching machine:

1) Before starting the PTMS Electromagnetic Separator, check the metal surface of the equipment first to find out the reason for the last shutdown. If the machine is stopped due to fault, the fault must be removed before starting the equipment.

PTMS Electromagnetic Separator

2) After the PTMS Electromagnetic Separator equipment (including electrical equipment) is checked and confirmed to be correct, the operating equipment (such as pump and main engine) should be turned first. After one week of rotation, it is found that the rotation is flexible and there is no stuck phenomenon, indicating that the operating part is barrierless.

3) Before opening the main engine, open the valve of each water pipe, observe whether the water nozzle is blocked, check the water pressure gauge, indicating that the pressure must meet the required value.

what is magnetic separation method for concentration of ore ？

4) Start the PTMS Electromagnetic Separator pump. Before starting the oil pump, you must first open the cooling water pipe, open the valves of each part of the oil circuit, and then start the oil pump. After starting the oil pump, pay attention to check whether the oil pressure is normal, whether there is oil leakage in the oil circuit, etc., and be sure to keep the oil circuit in normal circulation.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com